0740 769 0811 russ@bikemaker.co.uk

Bike Servicing and Repairs Bristol


Puncture Repair from £7

Punctures are only repaired if it’s the first one that the inner tube has had as we cannot previous repairs can sometimes cause problems.

Fit new Tyre from £5


Brake Tuning Service from £20

Check and examine pads/ cables/ callipers for wear, replace as necessary (cost of parts except cables not included). Lubricate pivot points and adjust brakes for optimum performance.

Wheel Fixing:

Spoke Replacement and Wheel Truing Front wheel from £12

+ £2 per spoke

Rear wheel from £12 (Wheel truing only)

Rear wheel from £18 + £2 per spoke.

Removal of cassette and then we true and replace damaged or broken spokes.

Hydraulic Brake Service

From £19 per wheel or from £35 per pair

Check pads for wear and replace as necessary (pads extra). Bleed system with appropriate fluid (included) and set pads/ callipers for optimum performance. Sticking pistons etc. will involve extra work and possibly parts which we can discuss with you at the time.

New Chain Fitting

From £10

Remove old chain replace with a new chain (adjusted to correct length and fit). (Chain cost not included)


Gear Tuning Service from £18

Degrease chain/ cassette/ chainrings. Replace cables if necessary (cost of cable included). Lubricate chain etc. and adjust gears to run smoothly.

Wheel Hub Service

From £15 per wheel or from £28 per pair

adjust and grease cup and cone style hubs. Fit new bearings on hubs (cost of bearings not included).

Frame & Forks

Headset Service from £18

Removal of forks from your bike, degrease and check bearings for wear. Replace as required (bearings cost not included). Headset reassembly with new grease and adjust to run smoothly.

Headset Replacement

from £22

Removal of old and installation of  new headset (headset cost not included).

Fit New forks from £24

Cut new forks to length, refit brakes etc.Bottom Bracket service/ replacement from £18 (bottom bracket not included)

Other Services

Build a bike from a box from £30

Assemble bike, check all nuts/ bolts for tightness. Adjust gears/ brakes to run smoothly.